Small Batch Concrete Plant Inspections

Submitted by admin,02/20/2014

For large or small batch concrete plant, some safety inspections need be done before starting concrete batching plant. Many operators do not know what are the specific inspections. Today, Zhengzhou Pioneer Machinery Co., Ltd lists some inspection items before using concrete batching plant:

1, Check whether all aggregate storage bins are full of materials.

2, Check whether the gas circuit has air leakage and water leakage phenomenon, if any, timely disassemble, clean and replace it. In addition, inspect there is flexible pipe damage and aging.

3, Check the movement of each pneumatic butterfly valve is accurate. If the valve can not be tightly closed, operators should promptly adjust it to closing state.

4, Check whether there is suitable quantity of oil in the reduction gear box. The amount of oil should not be too much or too little (according to specifications).

5, Check whether each of lubricating point of screw conveyor has been added lubricating oil. 

6, Check whether each of flexible connection of powder material weigher is well connected. It is prohibited to have loose phenomenon, otherwise a lot of powder would run out to cause serious environmental pollution.

7. Inspect whether each interface of the gas path is well sealed and whether there is flexible pipe damage and aging.

8. Make sure the discharge doors are tightly closed.

9,  the gas tank, air compressor water.

Zhengzhou Pioneer Machinery Co., Ltd is one professional concrete machinery manufacturer. You can find mobile concrete mixer, HZS concrete batching plants, brick making machine, etc in our catalog.
HZS concrete batching plant